2011Citreon DS3 Generate Remote and Program with AUTEL IM508

This post is available with how to generate remote and program Citreon DS3 year 2011by OBD with Autel MaxiIM IM508.

Here is the guide for you.

Customer has only chip key no remote

Chip: 46(pcf7936)

  1. Connect OBD cable
  2. Turn ignition on with customer key
  3. IMMO→CITROEN→ Manual selection
  4. DS3→2009→ Blade Key

  1. In MaxiIM IM508,read immobilizer password→Read immobilizer password(CAN)

  1. Turn ignition off
  2. Use the learned key to turn the ignition on

  1. Turn the ignition off
  2. Press ok on IM508 and then turn the ignition on immediately

  1. Turn ignition off
  2. Press ok and then turn the ignition on immediately
  3. Verify the password, please wait…

  1. Password: N9NF

  1. Immobilizer(CAN)→key learning
  2. All keys will be cleared, they can use again only they are relearned

  1. If security code is wrong, learning will not be allowed

  1. Password automatic fill: N9NF

  1. Enter the number of keys: 2

  1. Turn the ignition off
  2. Insert the 1 st key to be learned in 15s and turn the ignition on
  3. Learning to succeed, turn off and remove the key

  1. Insert the 2 nd key to be learned in 15s, and turn on
  2. Learning succeed, turn off and remove the key

Notice: if remote fail, remote can be learned by manually

Test remote ok. Start engine ok