VW HU162T Duplication by Alpha Key Cutting Machine

This post is the guide of how to use Kukai Alpha Key Cutting Machine to duplicate VW HU162T.

 

Procedures:

Click on “duplicate” and “ internal groove” button.

Select “tip” and “S1-B” image.

Fix original key on “ side B “of the jaw.

Note:You should remember to use 1.5 mm cutter to cut HU162T keys on “ side B “of the jaw.

Firstly, Press the image to start duplicating side A of original key.

Till duplicate is done, take out the original key and replace the right decoder with 1.5 mm cutter.

Fix a new key blank on S1-B jaw.

Click the “ cut” button to start cutting(close the shield).

When finished, fix other side of key on S1-B jaw.

Cutting is done with side A of the key.

Second, duplicate side B of the original key which has a small groove on it.

Click “ single external groove” and “ down single track tip” button.

Select “ S1-B” image (side face).

 

Fix original key on the jaw vertically, and press the image to start duplicating side B of original key .

 

Use Kukai Alpha to Duplicate is done.

Take out original key and fix the new key blank on S1-B jaw.

Click the “ cut” button to start cutting (close the shield).

Cutting is done with side B of the key.

Third, fix original key on the jaw vertically and press the image to start duplicating side C of original key.

Use Kukai Alpha to Duplicate is done.

Take out the original key and fix the new key blank on S1-B jaw.

Click” cut” button to start cutting.

Cutting is done with side C of the key.

Test the new key, work very well.

 

Thanks.