Why You Need The Launch Creader 3001 Code Reader Scanner?

As everybody who has cars knows, people always spend hundreds of dollars on their vehicles just because the engine light is on The easiest way to reset the check engine light and clear any codes is to use a scan tool, which plugs into the OBD2 DLC port, usually somewhere on the driver’s side. Check your owner’s manual for the location. For DIYers, you don’t need to invest in a top-of-the-line scan tool for basic diagnostic functions, Launch Creader 3001 make DIYer and car enthusiast repair their vehicle’s problem by themselves.


 Launch Creader 3001 function list

I/M readiness status test

View freeze frame date

View data stream
O2 Sensor
Evap system test
On-Board monitor test
Read & Clear DTCs
Identify VIN information
DTC code look up
Turn off MIL(Malfunction Indicator Lights)

Creader 3001 supports 10 modes of OBDII diagnostic :

Mode $01 Request current powertrain diagnostic data.
Mode $02—Request freeze frame information.
Mode $03—Request emissions-related diagnostic troublecodes.
Mode $04—Clear/reset emissions-related diagnosticinformation.
Mode $05—Request oxygen sensor monitoring test results.
Mode $06—Request on-board monitoring test results for specific monitored systems.
Mode $07 — Request emission-related diagnostic troublecodes detected during current or last completed drivingcycle
Mode $08—Request control of on-board system, test or component.
Mode $09—Request vehicle information.
Mode $0A—Request emissions-related diagnostic trouble codes with permanent status after a clear/reset emission-related diagnostic information service.



Launch Creader 3001 Support Languages:

Multi-Language:  English, French, Russian, Spanish, German, Italian, Portuguese




Launch Creader 3001 Support vehicle models


Suzuki, Honda, Mitsubishi, Nissan, Toyota, Mazda, Daewoo, Hyundai, Kia, Subaru, Infiniti, Lexus, Accura, Isuzu,Jeep Ford, EU-Ford, GM, Chrysler, Mini, Vauxhall, Dacia, Alfa-Romeo, Lancia, Peugeot, Renault, Citroen, Benz, BMW, VW, Opel, Volvo, Fiat, Landrover, Porsche, Seat, Skoda, Audi, Saab, Sprinter, Chrysler.


Launch Creader 3001 FAQs


Question1: Can launch Creader 3001 update?

Answer1: This scanner does not need to upgrade.


Question2: Can launch Creader 3001 support Benz C230K 2005?

Answer2: it can not work for 2005 C230K, but it can work for Benz 2006-2016 Benz cars.


Question3: will it work for honda accord 2009 lxp?

Answer3:  yes, it can work for honda ccord 2009 lxp.


Question4: Is this compatible with my 2007 toyota avanza in the philippines?

Answer4: I can not sure, I do not know if your car is JOBD car or OBD2 car, 3001 can not support jobd car, it supports obd2 protocol car.



Launch Creader 3001 customer reviews



This scanner tool is a good one, you can read and erase codes easily. I just used it on a 2008 Civic and I was able to read code that in this case was a faulty oxygen sensor and after the repair I was able to erase code . all good now. I like the launch tools.


Review 2:

Simple, cheap, and it works! Gave great live streaming info. Too bad I don’t know much of the data or have use for it at this time. But this would be really useful in the future. I mainly bought this to remove a code error. Although keep in mind, if you do not replace/repair the fault itself, the error will come back.



I used this to check the A/F and O2 sensors on my truck to determine if the sensors were bad or if I really needed to replace my catalytic converter. The I/M readiness information is useful when you are preparing for a smog inspection.

Review 4:

I used it on 2006 BMW 325i and 98 Toyota Sienna. work great on both cars. Reading code is a lot faster than my 5 years old OBD scanner. The display is a little small and a bit hard to read the text, otherwise, it is a good scanner. The oxygen sensor test looks cool but I haven’t gotten a chance to try it yet.

Review 5:

I was using an OBD2 scanner that linked to my smartphone but unless I wanted to pay much money for an app that gave me more than the elementary functions it did not do enough. This Creader has many features and easy to use. No need for batteries as it runs off your car’s voltage. The screen is bright and very easy to read plus it has lots of features that my old one did not have unless you paid for a better app.